Calculate your result
Enter your figures below. Values stay in your browser.
How to use this calculator
Enter bore and stroke in millimetres and a whole number of identical cylinders. Read total cubic centimetres and litres. Do not enter centimetres into the millimetre fields.
Formula used
cc = π/4 × bore(mm)^2 × stroke(mm) × cylinder count ÷ 1,000.
Worked example
86 mm bore × 86 mm stroke with four cylinders gives approximately 1,998.23 cc, or 1.998 litres.
Calculate swept volume from actual engine geometry
Use bore, stroke and cylinder count when those measurements are known. This is useful for checking a specification sheet or understanding how total cc is built from the volume swept by each piston.
Displacement does not include combustion-chamber volume and does not predict power by itself. Turbocharging, airflow, compression, rpm and many other design choices can make two engines of similar capacity perform very differently.
Assumptions and limits
This is swept piston volume and assumes identical cylinders. It does not measure combustion chamber volume or determine horsepower.
NIST SP 811: measurement units and conversions · Calculation methodology
Found a discrepancy? Send the inputs and expected result.
Related tools
Horsepower and Kilowatts Converter
Convert mechanical horsepower and kilowatts in either direction.
HP to PS Converter
Convert mechanical horsepower to metric horsepower (PS).
Torque Converter
Convert torque between Nm and lb-ft.
Power-to-Weight Ratio Calculator
Compare vehicle power with its mass.
This page shows the formula, a worked example, page-specific interpretation and the main limitations so you can audit the result before using it.